Recent Questions

مطالب مرتبط با «work» در Recent Questions | نویسنده: استخدام کار

VirtualBox VM not starting after upgrade

Don't look for the drivers on inteet, /sbin/vboxconfig builds them. The problem was the old drivers were still present and preferred. So I removed the old drivers and ran /sbin/vboxconfig again, this time it worked.sudo mv /lib/modules/3.16.0-4-amd64/updates/dkms/vbox* /tmp(Moving to /tmp instead of rm just in case)The directory may vary, I found it in the first command in my question with lsmod then modinfo. Then sudo /sbin/vboxconfig and it should work The new drivers are in /lib/modules/3.16.0-4-amd64/misc/ (No need to reboot.) Let's block ads!...

ادامه مطلب

OpenVPN only works as long as System is not rebooted

I hope this is the right place to ask this. My University lets students download a preconfigured executable of OpenVPN, where the settings are already branded in. Once you installed it, you just enter your credentials and you are coected. However, I noticed that it doesn't work anymore after the system is has been installed on is rebooted. If I install it, I get a successful coection with the VPN and can use it. If I restart my Laptop, it does not work anymore, but the Icons in the Tray still show a green screen. If I then uninstall it and reinstall it, without rebooting, it works again. The only difference in the log window when it's coecting, I notice when it does not work, one of the line...

ادامه مطلب

Can't establish a ROS2 network

I'm starting working with ROS2 (currently in alpha7 state). For this I build up a small network with an Raspberry Pi (Raspbian Jessie) coected to an router via LAN and an host PC (Ubuntu Gnome 16.04) coected to the same router via WLAN. Inside the host are some virtual machines (using VirtualBox) installed with Debian Jessie and coected via a bridged network (wlp4s0). I can also use ping, ssh and scp between all my machines (Rasp, Host, VMs). I found that the Rasp doesn't coect to the VM's but the VM's are in contact to each other. So I can send messages between the VM's. But a talker-listener-coection between the Rasp and the VM's doesn't work. Can anyone give me some suggestions to find ou...

ادامه مطلب

Copy Range of Data base on Cell Value

enter image description herecan anyone pls help. I hv a list with Column A to C, Row unknown depends on condition. Column B contains either "A" "B" "C" I would a VBA code to copy all data from column a - c when Column B is "A" to sheet 1 and to sheet 2 when column B is "B" and so on, I know its using the For i = 1 to .End(xlUp).Offset(0), but then what should I do, I tried but wasn't working at all for me. can any one pls help Let's block ads!...

ادامه مطلب

SSH reverse tunnel netstat ports

I've a question about SSH reverse tuel. I've an ubuntu server with sshd installed. I open ssh reverse tuel from a remote machines, on that machine the coection is restarted every time the tuel is interrupted. Whenever a tuel is opened, on the SSH server i can see two coection using netstat. One listening to the interal server port. Then other on an exteal port. The latter one is the SSH tuel. As example. given 138.10.20.10: my ssh server and 10.34.23.12 my remote pc, 5000 the port on my remote pc i would like to access to ssh -R 1122:localhost:5000 serveruser@1138.10.20.10 Now server side i've two listening coections, which looks like this tcp6 0 :::1122 :::* LISTEN tcp6 0 0 138.10.20.10:22 ...

ادامه مطلب

Windows 10 showing incorrect Directx version

I've installed Windows 7 32-bit(Ultimate SP1) & Windows 10 64-bit(Pro RTM) in the same laptop but in different partitions. But when I run dxdiag.exe(Run as admin. for sure) in both, Windows 7 retus Dx11, while Windows 10 retus Dx10. It's good to say my hardware supports Dx11. I've updated the graphics driver in both (Intel HD Graphics) but still no change. Let's block ads!...

ادامه مطلب

Ctrl + Click + Drag Deselects Selected Items and System Folders Have a Tag

Just like the title says, recently I've been noticing that when I'm selecting a group of items in a folder if I select some and click and drag over them again it deselects them. This never never happened before a couple weeks ago. I believe it started when I had an IT guy do a checkup on my PC. My System folders also have an aoying tag that says "System Folder" now but that can be easily overlooked. Examples: http://ptscr.com/cax3uc http://ptscr.com/cax3xp P.S: Never letting an IT guy touch my computer again unless it's something really serious, they always mess with something I don't want to be messed with Let's block ads!...

ادامه مطلب

Hardware wifi switch is off on Lenovo L440

I'm an L2 helpdesk guy and I have a user whose Lenovo L440 will not coect to wifi. The wifi icon in the notification area shows a red X and the "tu wireless on" button is greyed out in the Mobility Center. When she presses F8, it shows that wifi is on. The adapter is enabled and "allow to tu off to save power" is unchecked. We've reinstalled Pro/Set Wireless, and tried to install the adapter driver from the Device Manager. When I uninstalled the device there, checking the "remove driver" checkbox, it did not find the driver in Windows Update and I had to install Pro/Set Wireless from the Intel website. I've reinstalled the Hotkey Features Integration package and the Power Management driver. ...

ادامه مطلب

Windows 10 asks for updates ignoring update GPO

بخوانید Why Windows 10 asks user to update their computer also if they are under domain with GPO set to automatically update? This did not happen with Win 7 and I did not change any GPO about updates....

ادامه مطلب

FirstLogonCommands only works on 32bit architecture

I've got 2 Windows installations which are identical, the same settings, the same programs. The only difference is that the Windows architecture is different, the one is 32bit and the other one is 64bit. When having sysprepped my 32bit installation with the following answer file: U:Users...

ادامه مطلب

Windows 10 explorer Libraries location corrupted

I have a brand new computer with an SSD and an HDD both plugged in with SATA. Windows is installed on the SSD (C:) and the HDD (E:) is practically empty. I want the default windows libraries (i.e Downloads, Documents, Pictures etc.) to all be located on the HDD in order to save space on the SSD. I moved the downloads folder there using the properties menu (in the Location tab), but I guess I entered the Documents Folder location wrong and now it thinks the whole disk is that folder, and I can't restore it to default - I get an "invalid path" error. Also, I tried right-clicking the Libraries folder and then restore to default with no help. What it looks like: image Will formatting the HDD hel...

ادامه مطلب

Win 10 Netflix app bug : constant 100% volume

This bug has been raging on for 2 months now - lowering the sound through the Netflix app wouldn't work, the volume would stay at 100%. Only lowering windows master volume helps. Same thing happened on my other pc. Has anyone experienced the same bug and found a solution? Thanks! Let's block ads!...

ادامه مطلب

Need to connect to two different network ranges same time

Here is the story. my inteet coection gateway and my IP goes as GW: 192.168.20.x and IP : 192.168.20.23x and if I want to access web mailGW: 192.168.100.X and IP 192.168.100.2XX and my local area network GW: 192.168.1.23X and IP 192.168.1.25x Is there any way that I can access all these networks same time with out changing the IP address and GWs time to time PS: I have already added some routes but those are not working IDK why the routes I add please explain Let's block ads!...

ادامه مطلب

How to setup a working chroot in OS X?

I am making several websites on a single workstation, so I want to test them in more or less isolated environment. Having some Linux background, I decided to make a chroot for each of these web apps. To be able to launch my app handlers from inside the chroot, I wanted to forward the visibility of /usr/local/bin to the chrooted container, but I fail to see a direct equivalent of mount --bind. Is it at all possible to have a chroot with vanilla OS X, without FUSE or other keel extensions? Let's block ads!...

ادامه مطلب

ionic framework gives not found (404) when trying to start up why?

I just installed ionic following this guide. http://stackoverflow.com/questions/31041366/how-to-install-ionic-framework-on-ubuntu and also installed ionic / cordova using the command from ionic framework but when I start the app using this command ionic start todo example this message keep on showing up giving errors. I searched up and only found two threads talking about it but both of them just said restart the terminal. I even restarted my machine but still giving me this error. Can someone please give me a hand? Creating Ionic app in folder /home/et-ubuntu-pc/todo based on example project Downloading: https://github.com/driftyco/ionic-app-base/archive/master.zip [========================...

ادامه مطلب

Allowing VMware Workstation share through CentOS' firewall filter

I have set up some virtual machines using VMware Workstation PRO 12 in my server (ruing on CentOS 7 3.10.0-327.28.2.el7.x86_64 keel) and it works fine as long as the firewall is disabled. Now i want to activate the firewall and allow the communication to be established. here is a sum up of the setup that i have Chain INPUT (policy ACCEPT) target prot opt source destinationACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT tcp -- anywhere anywhere tcp dpt:bootps ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED ACCEPT all -- anywhere anywhereINPUT_direct all -- anywhere anywhereINPUT_ZON...

ادامه مطلب

Username/Password Incorrect Error When Accessing Windows 10 Share From Windows Server 2012 Workstation

I'm playing around with my fresh Windows 2012 R2 VM and am following this guide to convert it to a 'workstation'. I have network discovery on and all the other advanced sharing settings necessary on my server-tued-workstation. I have a Win 8 VM that is hosting a shared folder and my win 10 machine that's hosting a shared folder. The majority of the time, I'm able to access the shared resources. The problem I've run into is that if I restart my Win2012 VM, my mapped coections break. I run into "The useame or password is incorrect" error. If I try to map the resources again, the same error pops up. I know that I'm using the correct credentials. The temporary fix for me is that I would have to ...

ادامه مطلب

Excel 2013 Open All Recovered Files

I recently opened ~70+ Excel files all at one time (it was a massive data dump from a database which I was going to be locked out of in about 30 minutes, so I wanted to grab everything I could conceivably need). Unsurprisingly, my Excel crashed from the load. Upon restarting Excel, the Document Recovery pane opened and showed me all of the files. Is there a way to automatically have all the files in the Document Recovery Pane open up? I don't want to have to manually go through and open up 70+ documents by hand. I've tried looking around the Inteet, but it looks like most tutorials only talk about the Document Pane itself, not this specific question. Let's block ads!...

ادامه مطلب

Does the weight of the CPU heat sinks effect the motherboard or cpu in the long run?

I've been following this article (http://www.silentpcreview.com/article1498-page1.html). I'm new to most of it. I assume it is not an issue because Scythe Mugen is highly rated...I'm wondering how a heat-sink that weighs 650 grams attached to the motherboard will effect the board on the long run? Specially if the motherboard is vertical... Let's block ads!...

ادامه مطلب

What's the fastest way to transfer data between two hard drives?

I have: A laptop with one USB3 port and a few USB2 ports A USB3 hub Two identical USB3 hard drives To transfer data between the two USB3 hard drives, what is the optimum arrangement? For example, I could coect both drives to the USB3 hub and transfer data, or I could plug one into the laptop's USB3 port and another into a USB2 port. Let's block ads!...

ادامه مطلب