Converted Windows 7 to UEFI, now fails to do hybrid sleep

I have two hard drives, 3TB and 2TB. 2TB drive uses MBR, 3TB uses GPT. My Windows 7 OS is installed in the 2TB hard drive. I wanted to try out Elementary OS so I installed it on the 3TB drive in UEFI mode. Now I wanted to boot into Windows but the then I saw my Windows 7 boots in legacy BIOS. So I converted my 2TB drive without nuking my whole drive using gdisk. After that I followed the steps in this guide:

http://www.hasper.info/repair-a-destroyed-windows-7-uefi-boot-sector/

to build my Windows 7 EFI system partition (ESP) and the Microsoft Reserved Partition (MSR)

I have two problems, which may or may not be coected. bcdedit does NOT work unless I manually specify the location of the BCD store; which involves mounting the EFI system partition. The error shown is:

The boot configuration data store could not be opened.
The volume for a file has been exteally altered so that the opened file is no longer valid.

So I mounted the EFI system partition and used bcdedit to fix my strange Vista loader.

bcdedit /store R:EFIMicrosoftBootBCD /set {default} locale en-US

I digress.

Now, the main problem. Hybrid sleep does not work (yes, before I did the bcdedit commands.) It simply goes straight to the login screen. I am thinking this may have to do with Windows not being able to access BCD.

Because according to the Windows Vista startup process, the BCD should have an option to resume from hibeation (yes, I do know the difference between sleep and hibeation.) And apparently the windows boot loader should have a path to winresume.efi.

Please correct me if my thinking is wrong.

I tued on hibeate powercfg -h on, change the hiberfil.sys to 100% my RAM (8gb) powercfg -h -size 100. Here's the result of powercfg -a

The following sleep states are available on this system: Standby ( S3 ) Hibeate Hybrid Sleep
The following sleep states are not available on this system:
Standby (S1)
        The system firmware does not support this standby state.
Standby (S2)
        The system firmware does not support this standby state.

I really miss this feature as it's a heck of a lot more convenient than restarting. I'm also a pretty poor guy, so nothing about reinstalling my W7 installation would be nice.